AD TEX is a non-phthalate opaque ink for direct printing on to fabrics or for overprinting a white under-base.
For medium to dark coloured garments-100% cotton, cotton blends, some nylon and polyester with an under-base low bleed grey.
FEATURES: Satin finish- Creamy viscosity-Excellent wet on wet printing-Resistant to build up
Excellent flash properties-Transfer printing- direct printing onto the fabric.
FLASH TEMPERATURE AT: 230°F (110°C)
CURE TEMPERATURE AT: 300-320°F (150-160°C)
STORAGE: 65-90°F (18-32°C) AVOID DIRECT SUNLIGHT
FABRIC TYPE: 100% COTTON, COTTON BLENDS, SOME NYLON, POLYESTER WITH AN UNDER BASE LB GREY.
MESH COUNTS: 86-290 T/IN (34-91 T/CM)
SQUEEGEE DUROMETER: 60-80 STD OR
70/90/70 TRIPLE BLADE SQUARE EDGE.
SHARP STROKE, 75 DUROMETER FOR OPACITY
DO NOT USE EXCESS SQUEEGEE
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.