Low Bleed (LB) inks are formulated to be directly printed onto medium to dark colored, cotton/polyester
blends,100% polyester & nylon garments. These inks provide great coverage and have a creamy body
unlike most bleed resistant inks, therefore making the ease of printing more simple. Please note that tightly
woven nylon garments will require a nylon additive for adhesion.
Mesh: 86-160 (34 to 62 threads per cm)
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
, puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff
or dulling use Suede Additive (I10-9907).
To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
700 F for 9 seconds, just enough so the surface is tack free.
Squeegee Blade: Sharp.
decreased. For heat presses use 390 F/195 C for 8 seconds.
325 F/163 C for 1 to 1 1⁄2 minutes. Oven temperature can be increased and dwell time
Bleed Resistance: Great
Storage: o o
Ideally 65 to 80 F. Keep out of direct sunlight.
Wash-up: Any plastisol cleaner.
(Refer to Standard Color-card for color reference)
I-10-3014 Poly Primrose
I-10-3002 Poly Lemon
I-10-3006 Poly Yellow Gold
I-10-3001 Poly Lt Gold
I-10-3372 Poly Gold
I-11-6438 Poly Scarlet
JB-6056-LB Poly Brite Red
JB-5048-LB Poly Sky Blue
JB-4053-LB Poly Kelly Green
JW-3040-LB Poly Vegas Gold
JB-2250-LB Poly Gray
JR-5332-LB Poly Lt Navy
JN-5001-LB Poly Royal
JW-5666-LB Poly Purple
JB-6247-LB Poly Cardinal
JB-6251-LB Poly Maroon
JB-2050-LB Poly Lt Brown
JB-7096-LB Poly Orange
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.