TECHNICAL DATA SHEET

AQUA ART SERIES SCREEN INK IS A WATER-BASED INK THAT PRODUCES A GLOSS OR MATT INK FINISH. IT OFFERS GOOD SCREEN STABILITY.

EXCELLENT LIGHT FAST COLOURS.

IS SOLVENT FREE AND LOW ODOUR THE NUMBER ONE SCREENPRINTING INK SYSTEM.

AVAILABLE IN 12 STANDARD COLOURS / BINDER / 4 COLOUR RANGE.

SUBSTRATES PAPER , DISPLAY BOARD , CORRUGATED BOARD , FINE ART PAPERS. (WEIGHTS MORE THAN 120GSM)

USER INFORMATION

WHILE TECHNICAL INFORMATION AND ADVICE ON THE USE OF THIS PRODUCT IS PROVIDED IN GOOD FAITH, THE USER BEARS SOLE RESPONSIBILITY

FOR SELECTING THE APPROPRIATE PRODUCT FOR THEIR END-USE REQUIREMENTS. SEE FULL DISCLAIMER AT THE END OF THE DOCUMENT.

MESH 77-140 POLYESTER MESH FOR MOST APPLICATIONS [100-40 STD]

STENCIL  AUTOTYPE 6000 EMULSION

SQUEEGEE DURA BLADE SG950 70/75 GREEN SQUEEGEE

COVERAGE 30-40 SQUARE METERS PER KG DEPENDING ON MESH / PAPER.

PRINTING AQUA ART INK MAY BE THINNED TO ACHIEVE PROPER INK FLOW (SEE ADDITIVES SECTION).

THOROUGHLY MIX THE INK PRIOR TO PRINTING.

MAINTAIN INK TEMPERATURE AT 65°-90°F (18°-32°C) FOR OPTIMUM PRINT PERFORMANCE. LOWER

TEMPERATURES INCREASE THE INK VISCOSITY, IMPAIRING FLOW. ELEVATED TEMPERATURES LOWER THE INK

VISCOSITY, REDUCING PRINT DEFINITION, FILM THICKNESS AND OPACITY.

DRYING AQUA ART INK DRIES BY EVAPORATION IN 20-30 MINUTES DEPENDING ON TEMPERATURE AND HUMIDITY.

JET DRY AT 66 - 77 C  FOR APPROXIMATELY 30-45 SECONDS USING MAXIMUM AIR FLOW

THROUGH THE OVEN. ADEQUATE COOLING MAY BE NECESSARY TO AVOID BLOCKING PROBLEMS WHEN STACKED.