Mesh: 86-240 (34 to 110 threads per cm)
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
(I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff
or dulling use Suede Additive (I10-9907).
To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
700 F for 9 seconds, just enough for the surface to be tack free.
Squeegee Blade: Sharp.
decreased. For heat presses use 390 F/195 C for 8 seconds.
325 F/163 C for 1 to 1 1⁄2 minutes. Oven temperature can be increased and dwell time
Bleed Resistance: None
Storage: o o
Ideally 65 to 80 F. Keep out of direct sunlight.
Wash-up: Any plastisol cleaner.
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.