The LC Series is WM’s most versatile series on the market, enabling printers to print on the most difficult substrates. Not only does this system hold up to the worst bleeders, but at the lower cure temps it
could save a shop a ton of money in reduced energy costs.
-White or colored garments-100% Cotton garments
-Cotton/Polyester, Acrylic, Polyester, Polypropylene
pandex and stretchable substrates
Bleed Resistance: Excellent
-Superb Bleed Resistance
-Easy to print viscosity
-Great replacement for silicone inks
-Flat, smooth finish for multi-color printing
Storage: 70º to 80ºF. Due to the ability to cure at low temperatures, this is extremely important. Ink will become thicker over time but can be reduced to a printable viscosity.
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Modifications: Modifications are not recommended unless completely necessary. To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020) & puff use Puff Additive
(I10-9903). ANY modification will effect Low Cure properties.
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle. Flashing: 700ºF for 3-5 seconds, just enough for the surface to be tack free. Squeegee Blade: Sharp.
Fusion/Curing: 230ºF/121º C for 1 ½ - 2½ minutes. 325ºF/163º C for 1 to 1 ½ minutes.
Wash-up: Any plastisol cleaner.